Yosemite Icons skateboard deck wall art

How to Hang a Skateboard Deck as Wall Art

A skateboard deck makes a surprisingly good piece of wall art. It is long, graphic and has a story behind it. Here is how to hang one so it looks intentional, whether you are putting up a single deck or building a full gallery wall.

1. Choose your hardware

  • Deck wall mount. The cleanest option. A low-profile mount holds the deck slightly off the wall so it looks like it is floating. Our deck wall mount is made for exactly this.
  • Screws through the truck holes. Every deck has pre-drilled holes where trucks would normally go. Two screws with wall anchors through the top holes will hold it securely. Use small spacers if you want a little shadow behind it.
  • Picture rail or ledge. No drilling into the deck at all. Great for renters or anyone who likes to swap art often.

2. Get the height right

Hang the center of the deck around 57 inches from the floor, the same eye level galleries use. Above a couch or console, leave about 8 to 10 inches between the furniture and the bottom of the deck.

3. Pick a layout

  • One statement deck: hang it vertically in a hallway, entry or narrow wall.
  • A row of three: three decks side by side with 3 to 4 inches between them. A series like our Yosemite Icons works well here.
  • Gallery wall: mix decks from different parks, like a map of every trip you have taken. Start with the center deck and work outward.

4. A few finishing tips

  • Keep decks out of strong direct sunlight to protect the colors over time.
  • Use a level. Long, narrow pieces show a tilt quickly.
  • Lay the layout out on the floor first, or tape paper outlines on the wall, before you drill.

Ready to start your wall? Browse our national park deck wall art or find a gift in our national park gift guide.

Back to blog